Do I need a new water main?
Low pressure, a meter that keeps turning, wet patches in the garden or a leak letter from the water company are the usual signs. Here is how to tell, and what to do next.
Rather talk? Ring free on 0800 804 4624
or WhatsApp us a photo.
- Free visit and quote
- No obligation
- Fixed price before we start

What customers say
Rated 4.9 on Google
Swipe for more reviews
Sound familiar?
Supply pipes rarely fail overnight. The signs creep up, and most people notice one of these first.
“The shower is not what it was”
Pressure that has dropped over the years, or falls away when someone else turns a tap on, often means a narrow, furred-up or leaking pipe.
“The water company says we have a leak”
They spot it from your meter readings. If the leak is between your boundary and the house, it is yours to fix.
“Our bill has gone up and we have not used more”
On a meter, an underground leak costs you every hour of every day, even when you are asleep.
“There is a patch of lawn that never dries”
A soft or greener strip along the line from the boundary to the house is a classic sign of a leaking supply pipe.
“The water comes out brown”
Rusty water from the cold tap usually means an old iron or steel pipe breaking down inside.
“We have had it patched before”
If the pipe keeps failing in new places, each repair is only buying time. A new pipe stops it for good.
Low water pressure: is it your pipe?
Not every pressure problem is the supply pipe. A few quick checks tell you a lot before anyone comes out.
Is it every tap, or just one?
One weak tap or shower is usually a fitting, a valve or a blocked head inside the house. Every tap weak points to the supply.
Is it worse at busy times?
If it drops in the morning and evening rush, the pipe may be too narrow for the house, or the water company's pressure may be low.
Are the neighbours the same?
If the whole street is low, it is the water company's main. Ring them first; that one is theirs to sort.
Is the outside stop tap fully open?
It sounds obvious, but a half-closed stop tap after work in the road is more common than you would think.
Many older homes are fed through a half-inch lead or iron pipe that was laid for one kitchen tap. Today the same pipe is asked to run two bathrooms, a combi boiler and a garden hose. Upgrading to a modern 25mm MDPE supply pipe is often the fix, and it can usually be moled in without a trench.
Which pipe is yours?
Most people only find out when it leaks. The water company looks after the main in the road. The pipe that runs under your garden to the house is your responsibility.
- 1
The main in the road
The water company owns this, and the pipe from it as far as your boundary.
- 2
Your boundary
Usually where the outside stop tap or meter sits. From here in, the pipe is yours.
- 3
Your supply pipe
If it leaks, is made of lead or gives poor pressure, putting it right is down to you. This is the pipe we repair and replace.
- 4
How we replace it
Two small pits and a mole that pulls the new pipe through underground. The lawn and drive stay where they are.
What is your pipe made of?
Look where the water comes into the house, usually under the kitchen sink by the stop tap. The material tells you a lot about how much life it has left.
Lead: dull grey, soft
Common in homes built before about 1970. Scratch it with a coin and it shows shiny silver. Best replaced whatever its condition.
Galvanised steel: grey, threaded joints
Used from around the 1940s to the 1970s. Rusts from the inside, narrowing the pipe and turning the water brown.
Iron: heavy, often rusty
Strong but it corrodes over the decades. If it is old and you have brown water or low pressure, it is likely on borrowed time.
Black plastic: older polyethylene
Early plastic pipe from the 1970s and 80s. Some of it has gone brittle with age and splits.
Copper: orange-brown, thin
Usually fine, but where it runs underground it can corrode and pinhole in some soils.
Blue MDPE: modern
The standard for new supply pipes. Does not rust or corrode. If yours is blue, the pipe itself is probably not the problem.
Not sure? Send us a photo of the pipe under your sink on WhatsApp and we will tell you what it is. If it is lead, see lead pipe replacement.
What happens if you leave it
You keep paying for lost water
On a meter, a small underground leak can add up to thousands of litres a year.
It fails at the worst time
A tired pipe usually goes in a hard frost or the thaw after it, when everyone else needs help too.
The ground pays for it
Water escaping underground softens paths and drives and can wash out the ground under them.
An emergency costs more
A planned replacement on a day that suits you is cheaper than an urgent repair, with no water damage to clear up.
Not sure? We will tell you for free
If the pipe has plenty of life left, we will say so. If it needs replacing, you get a fixed price and no pressure.
Step 1
Ring or send a photo
Tell us what you have noticed. A photo of the meter or the pipe under the sink often tells us a lot.
Step 2
We come and look
We check the pipe where it comes in, the meter, the pressure and the route from the boundary.
Step 3
An honest answer
Leave it, repair it, or replace it, and why. In plain English.
Step 4
A fixed price
If it needs doing, a price in writing that covers everything.
Want a rough figure now? See what a new water main costs.
Over 20 years on supply pipes. From Wokingham we cover Berkshire and the counties around it, west London included. Fully insured.
A fixed price before we start. We look at the job and give you the price in writing. The quote is free and you are under no obligation.
We deal with the water company for you. We work on supply pipes in Thames Water, South East Water and Affinity Water areas and handle their paperwork.
Questions people ask us
How long does a water main last?
It depends on what it is made of. Lead and galvanised steel are well past their expected life in most homes. Modern blue MDPE pipe does not rust or corrode and is made to last for many decades.
Who is responsible for the water main to my house?
You are responsible for the supply pipe from your boundary to the house. The water company looks after the main in the road and its pipe up to your boundary, usually where the outside stop tap or meter is.
Can I upgrade my supply pipe to get better pressure?
Often, yes. Replacing an old narrow pipe with a modern 25mm MDPE pipe usually improves the flow at your taps. If the water company's own pressure is low, a new pipe cannot fix that, and we will tell you if we think that is the case.
We share a supply with next door. Can we have our own?
Yes. We lay a new pipe on your land and arrange the new connection with the water company, who make the connection at the main and charge for it separately.
Is the visit really free?
Yes. We come and look, tell you what we think, and give you a price if it needs doing. There is no charge and no obligation.
Want someone to have a look?
Tell us what you have noticed and where you are. We will tell you honestly whether your pipe needs replacing, and give you a fixed price if it does.
Other things we can help with
- Leak detectionFind where the supply pipe is leaking before anyone digs.
- Water pipe replacementA new supply pipe from your boundary to the house.
- Trenchless molingThe new pipe goes in underground. No trench across the garden.
- Lead pipe replacementOld lead out, modern plastic pipe in.
- Open-cut trenchingFor ground a mole cannot get through. Put back as we found it.
- Burst pipe repairsWater coming up through the lawn or drive? Ring us.
- What it costsWhat changes the price, and how we quote.

